Single Station One Head Blow Molding Machine for Plastic Furniture with Parison System
SLBC series: (German model)
1: linear guide support single frame, finite element analysis of the design, to ensure adequate clamping force, not up mode. All parts of the
machine is made by advanced numerical control equipment with high precision.
2 Note:
(1)The cooling water of the oil cooler should be provided before the machine starts working.
(2) When the work of the blow molding machine machine finishes, please stop providing cooling water and drain the cooling water. In areas
whose winter is biting cold, cooling water should keep circulating under low pressure when the machine is shut down(if the cooling water freezes,
please drain the cooling water and then use compressed air to drain the remaining water so as to prevent the oil cooler and other equipment from
being damaged).
(3) Please select soft water (mineral-free) as cooling water. In general, the water from wells contains a lot of mineral. Please equip a filter and
clean the cooling water pipes and cooling tower often to avoid sediments which can reduce the cooling efficiency.
| SPECIFICATION | SLBC-90 |
| MATERIAL | | PE,PP,EVA,ABS,PS |
| MAX CONTAINER CAPACITY | L | 60 |
| OUPUT(DRY CYCLE) | PC/HR | 450 |
| MACHINE DIMENSION (LxWxH ) | MM | 6300x3400x4200 |
| TOTAL WEIGHT | TON | 14T |
| CLAMPING UNIT | |
| CLAMPING FORCE | KN | 260 |
| PLATEN OPENING STROKE | MM | 400-1200 |
| PLATEN SIZE(WxH) | MM | 900x1000 |
| MAX MOULD SIZE(WxH) | MM | 750x1200 |
| MOLD THICKNESS | MM | 410-700 |
| EXTRUDER UNIT | |
| SCREW DIAMETER | MM | 90 |
| SCREW L/D RATIO | L/D | 25 |
| MELTING CAPACITY | KG/HR | 140 |
| BARREL HEATING POWER | KW | 20 |
| NUMBER OF HEATING ZONE | ZONE | 5 |
| EXTRUDER MOTOR RATED POWER | KW | 45 |
| DIE HEAD | |
| NUMBER OF DIE HEATING ZONE | ZONE | 4 |
| POWER OF DIE HEATING | KW | 18 |
| MAX DIE-PIN DIAMETER | MM | 400 |
| POWER | |
| MAX DRIVE POWER | KW | 57 |
| TOTAL POWER | KW | 105 |
| FAN POWER OF SCREW | KW | 4 |
| AIR PRESSURE | MPA | 0.8-1.2 |
| AIR CONSUMPTION | M3/MIN | 0.8 |
| AVERAGE ENERGY CONSUMPTION | KW | 38 |
| ACCUMULATOR CAPACITY | L | 8 |
Product Tags:
|
|
Single Station Automatic HDPE Bottle Blow Molding Machine Images
|
